The powerful test instrument PressurizeIT S9 is used to perform leak testing on products that need to be air or liquid proof e.g. a medicine can has to be moisture resistant and an engine has to be totally liquid proof. Testing with over-pressure or vacuum is carried out quicker, easier, and less expensive than testing using the product’s working media. The S9 is a superior leak test instrument available for different working pressures, from vacuum pressure to 15 bar.
It is used for leak testing with air in overpressure or vacuum, which is faster, simpler and more cost efficient than if you would conduct the test using water or oil. The measurement is carried out using one of two available methods; Differential pressure testing or Flow testing. Leak testing is the way of determining how much an object leaks, and the PressurizeIT S9 uses air as a media to test that.
It can be used on all products containing any type of liquid, gas or air; e.g. water, oil, gasoline, Freon or Glycol, most products actually. These are some examples of different application areas and products that the S9 can be used for/in:
Automotive: Engine block, clutch, transmission/gear box, transmission/gear box houses, intake manifold, intake manifold gas channels, exhaust pipe, exhaust valve, clutch plate, cylinder head, retarder house, crank pit, valve body, valve housing cover, common rail systems, all types of bearing houses, retarder bearing house, cylinder blocks, fuel channel, fuel pipes, fuel tanks, radiator, brake cylinder, caliper, fuel systems, steering servo, size control, bedplate, pressure tank, tank coupling, water pump, clutch cover, pressure cap, air pipe, filler cap.
Packaging: test for closure and seal integrity of packages for example: sterile products, ink cartridges and perishables that can be negatively affected by bacteria, oxygen and/or moisture.
Medicine and Pharmaceuticals: Blister packages, medicine bottles, medicine cans, sachets, and plasma bags etc that can be negatively affected by bacteria, oxygen and/or moisture.
Air Condition: Test several components, including: different types of valves, including: control valves, adjustment valves, ball valves, vacuum valves, hydraulic valves, temperature regulator valves, and tools, bellows, thermostats, different types of filters, and different types of piping.
Electronics: Test for example: different types of electronic parts and devices, different types of batteries, different types of casings, cellular phones, casings for cellular phones, cellular phone antennas, alarm buttons, different types of lights, amplifiers, phones, optical sensors, com radios, electric heaters, shavers, and weapon sights etc.
Hydraulic and Pneumatic: Test for example: different types of hydraulic and pneumatic components, valves, hydraulic motors, cylinders, all types of tubing, pipes and couplings, different types of water mixers, outboard drives, compressors, pressure tanks, bottle gas tanks, WC flushing mechanisms, and different types of jacks.
Casting: Test for example: different types of housing and covers, oil sumps, gear box houses, bearing box covers, clutch housing, range housing, engine blocks, coolers etc.
|Standard pressure editions: Vacuum:-1 till 0 bar (Vacuum),Overpressure: 0.05 till 0.5 bar (Low),0.2 till 5 bar (Normal), 1 till 10 bar (High) and 2 till 15 bar (Extra high)||Leak rate Limit: max:+/- 500 Pa min: 1 Pa/s|
|Network connection: 100-240 VAC / 0.9 A 50-60 Hz||No of display digits: 3|
|Weight: Approx. 16 kg||Display sampling time: 100ms|
|Size: 188mm x 400mm x deep 315mm||Timer setting: 999.9 s|
|Sealing grade:IP32||Hårdvara: 8 BIT CPU.|
|Color: Silver gray (RAL 6021) with a dark green front panel.||Test pressure source: Clean air 1 bar over test press.|
|CE – marked||Pilot pressure source: Clean air min 5 bar|
|Designed for industrial use||Ambient temperature:|
|Differential pressure sensor:||– Operating temperature: 5-40°C|
|– Reading accuracy: 0.3 Pa||– Storage temperature: -20-60°C|
|– Sensor range: +/- 500 Pa||Ambient humidity:|
|– Sensor proof pressure: 1.5 MPa||– 80% Relative Humidity|
|Resolution: 1 Pa||– 80% RH or less, no dew condensation|
|Display units (all units available upon request):||Communication: RS 232, TCP/IP (optional)|
|– Test Pressure (standard): kPa, mBar||Control I/O Port: DB-9P Male connector|
|– Leak (stnd): Pa, mm3/s, 1/100 ml/min, ml/min, l/min||Combination instruments available upon request|